在线一本码道高清

Construction method of automobile primer

05-18
介绍 <br /> 底漆层包括底漆、腻子、二道底漆、封闭底漆等。 Introduction to the construction of automobile primer <br /> The primer layer includes primer, putty, two primers, closed primer and so on. 或剥落。 A suitable primer coating makes the topcoat durable and beautiful. If the basecoat is not good, the appearance of the topcoat will be affected, and even cracks or peeling will occur.

经过涂装前表面处理后,一般可以直接喷涂头道底漆。 After the car body is treated with the surface before painting, it can generally be directly sprayed with primer.

For the surface of the metal that has been pickled and rusted, after the roughening treatment, it can be coated with a layer of phosphating primer, or "new strength" alloy primer, British ICI durable erosion primer, and American "DuPont" 810R anti-rust hunting corrosion primer Paint to increase adhesion between the metal surface and the primer.

在于金属表面的防锈和防腐,增加腻子与车身金属表面的粘着作用。 The purpose of the primer is to prevent rust and corrosion on the metal surface and increase the adhesion between the putty and the metal surface of the vehicle body. When spraying the primer, the primer should generally be selected according to the vehicle model. The proposed options during construction are as follows:

1. Selection of primer for domestic buses

When repairing general domestic buses for spraying the primer, the surface of steel should be FO6-1 iron red phenolic primer, and F06-1 zinc yellow phenol primer for light metals such as aluminum and aluminum alloy.

的底漆选用 2.Selection of primers for high-end or imported cars

Available "Xinjin" protective green primer, P565-8882K fast thick film primer, CICPO82-28 anti-floating red primer,
2K two-component primer, "DuPont" 30SR nitro primer, l505 air-dried primer or 1020R multi-purpose high film thickness primer, "Parrot" brand 285-16 heat-sensitive insulation primer It can be selected according to the paint specified by the manufacturer of the original importing country.
Primer construction requirements; construction should be mainly spraying, and it is required to apply evenly, without leakage, and without flow marks.

Cancel reply to post your comment:

Hot recommendation